Home
Agricultural Irrigation
Ag-Series Specifications
Ag-Series Features
Horse Arenas
Sports Fields
Grounds, Parks, Cemeteries
Construction Sites
Nurseries/ Small Gardens
Turf Irrigation Specifications
Turf Irrigation Features
Slurry Reels
PTO Slurry Pumps
PTO Water Pumps
Hose Clamps
Booster Pumps
Select A Product

      

Repair Parts Manuals
       
Dealer Locator
 
Request Info

Kifco
707 S. Schrader Ave.
P.O. Box 290
Havana, IL 62644 USA
Phone: 309.543.4425
Phone:
800.452.7017
Fax: 309.543.4945

Slurry Pumps

PTO Slurry Pumps

 

Bottom discharge assmbly shown with power primerNT120S Pump Model

Single stage, closed impeller, centrifugal pump with a mechanical seal and integral gearbox. The wide design impeller is capable of passing up to a maximum 5/8" solid. Four gearbox ratios are available. Two are designed for PTO pumps with input speeds of 540rpm or 1000rpm. The other two are made to run direct from an engine. 

FRT94/35 Pump Model

Side discharge assembly shown with power primerSingle stage, open impeller centrifugal pump with a mechanical seal and integral gearbox. It will pump most animal waste slurries except long fibrous material which must first be run through a chopper. The pump includes a stationary knife which will slice through materials that build up at the eye of the impeller. The pump is very aggressive with the material being pumped. The pump volute and impeller are made from spheroidal graphite (SG) iron which is twice as strong and four times tougher than regular iron. The input speeds are the same as the NT120S above.

PTO Surry Pumps

PTO Surry Pumps are mounted on heavy duty carts. The cart for the bottom discharge assembly is fitted with 6.70 - 15 wheels. The cart for the side discharge assembly is fitted with 4.80 - 12 wheels. Pumps mounted on carts are available with the PTO drive shaft only or fully fitted as described here.

Unfitted Pumps include:
Fitted Pumps include:
Bare Pump
Pump Cart
PTO Drive

Discharge Fitting
4" Heavy-duty Discharge Valve
Suction Fitting with  Check Valve
6" Suction Hose Adapter
Priming Pump with Easy Flush Line
Pressure Gauge
Gauge Protector

Optional Equipment

Optional Equipment

  • Power Primer: power primer is driven by a v-belt from a pulley mounted on the pump PTO input shaft.
  • Lever-Loc 90° bend: Allows the suction hose to be used at an angle to the suction inlet.
FRT Pump Stationary Knife

FRT Pump Stationary Knife

 View of the eye of the impeller and the knife.

Pump Performance (Maximum Recommended  Impeller Speed: NT120S= 3,200rpm,FRT 94/35 =2,900rpm)

Model Impeller Speed rpm GPM 200 300 400 500 600 700 800
NT120S 3100 PSI
HP
153
41
152
48
150
56
148
65
144
79
-
-
-
-
2700 PSI
HP
112
30
112
37
112
43
110
51
106
60
-
-
-
-
FRT
94-35
2900 PSI
HP
230
30
230
100
229
116
227
127
220
140
210
153
190
164
2500 PSI
HP
172
59
170
70
170
78
168
91
160
102
150
110
147
129
2000 PSI
HP
105
36
104
41
102
46
100
53
95
60
87
67
70
72

Standard Gearbox Ratios

Input Speed rpm Ratio Pump Shaft
540          NT/FRT 1 : 5.7

1 3/8" dia x 6 spline

1000        NT/FRT 1 : 3.2 1 3/8" dia x 6 spline
2000           NT    1 : 1.55 40mm dia x 10mm keyway
2000          FRT 1 : 1.38 40mm dia x 10mm keyway

Weights & Dimensions

NT120S
FRT94/35
Bottom Discharge 55"Wx70"Lx38"H 800 lbs
NT120S
FRT94/35
Side Discharge 48"Wx70"Lx39"H 750 lbs
 

Copyright © 2002, Kifco
Water-Reel® is a registered name belonging to Kifco