Home
 Agricultural Irrigation
 Ag-Series Specifications
 Ag-Series Features
 Horse Arenas
 Sports Fields
 Grounds, Parks, Cemeteries
 Construction Sites
 Nurseries/ Small Gardens
 Turf Irrigation Specifications
 Turf Irrigation Features
 Slurry Reels
 PTO Slurry Pumps
 PTO Water Pumps
 Hose Clamps
 Booster Pumps
Select A Product
       
      

Repair Parts Manuals
       
Dealer Locator
 
Request Info

Kifco
707 S. Schrader Ave.
P.O. Box 290
Havana, IL 62644 USA
Phone: 309.543.4425
Phone: 800.452.7017
Fax: 309.543.4945

Turbine Drive Water-Reels

Ag-Series Standard Features

Kifco has more than 40 years of experience in the design and manufacture of traveling irrigation machines. The highly efficient turbine motor was developed specifically for the hard hose traveler to operate with both fresh and 'gray' water. These machines are marketed under Kifco's trademark Ag-Rain. Ag-Rain Engine Drive machines are available for applications where the water quality does not permit the use of a turbine.

Engine vs. Turbine

There are three circumstances that usually dictate the need for engine driven Water-Reels instead of turbine driven Water-Reels.

      1. High Travel Speeds.  An engine driven model should be used if high travel speeds are needed for light applications (0.3 inches of water or less).  Engine driven travelers are capable of speeds two times that of turbine drives.

       2. Slurry Application.  If the Water-Reel is applying slurry or any substance that contains significant solids, an engine driven model should be used.  Usage of a turbine driven model in a slurry application is limited due to the size of particles that can pass through a turbine motor.

       3. Marginal Water Pressure.  If the pressure of the water is marginal it may be wise to choose an engine driven machine.  The turbine driven system will take approximately 6psi to 10 psi to power the turbine depending on the speed of travel.  This additional pressure at the sprinkler may be critical.

 When these three factors are not involved, the turbine driven models are the best choice.  The turbine requires less service and attention than the engines.  Most operators prefer the operating simplicity of a turbine.  There are no oil changes, no gas tanks to fill, and no engines to start.  With a turbine driven model, when the pump runs, the turbine runs.  When the pump stops; the turbine stops.

A-series

Ag-Series Standard Features

  • Radial Inflow Turbine... The heart of the drive system. This extremely efficient turbine motor delivers quiet, smooth, continuous power.
  • Automatic Shutdown for the turbine motor
  • Heavy Duty Chassis and frame
  • Retraction Speed Indicator
  • Pressure Gauge
  • Infinitely Adjustable Speed Ranges
  • Speed Compensator
  • Mis-wrap Safety Stop
  • PTO Rewind and Drive Shaft
  • Gun Cart with adjustable wheel width
  • Hose Guide to insure proper packing of hose
  • Ball Bearing Turntable
  • Slow Reverse Gun
  • Gun Cart Lift
  • Stabilizer Legs - Heavy Duty
    Crank down on  27A, 30A, 33A,
    Hydraulic on 37A, & 40A
  • Telescope style on  23A
  • Supply Hose - 4 inch male ring lock coupler on inlet end
    4 in. x 30 ft. on 30A, 33A, 37A, & 40A
    3 in. x 30 ft. on  23A, 27A, 30AS, & 30A

Polyethylene Tube

Only PE tube designed and constructed for the constant coiling and dragging is considered for use on Ag-Rain Water-Reels®. The tubing is backed by a 5-year prorated warranty.

PE Tube Repair

A simple "screw-in" mender is available for repairing the PE tube should it become damaged for any reason.

(800) 452-7017


Copyright © 2002, Kifco
Water-Reel® is a registered name belonging to Kifco